Are you interested in this product?
Become a customer and benefit from
An unrivalled selection
Special terms
Tailored advice
GREASE NIPPLES ASSORTMENT BOX OF 110 PIECES TECHNI-POWER
TECHNI-POWER
Reference 1945917
Heat treated to SAE J534 specification with a hardness at the grease end of at least 83 on the Rockwell scale.
The grease nipples are fitted with heat treated springs for extended life.
The steel grease nipples are zinc plated with a plating thickness of 0.0002 "(5 microns) in accordance with SAE See more
The grease nipples are fitted with heat treated springs for extended life.
The steel grease nipples are zinc plated with a plating thickness of 0.0002 "(5 microns) in accordance with SAE See more
| Material | Steel |
|---|---|
| Pression | 413 |
| Type | Straight and angled oiler |
| Ø | 6 - 8 - 10 |
| Tread width | 100 |
Description
- Heat treated to SAE J534 specification with a hardness at the grease end of at least 83 on the Rockwell scale.
The grease nipples are fitted with heat treated springs for extended life.
The steel grease nipples are zinc plated with a plating thickness of 0.0002 "(5 microns) in accordance with SAE J534 specification and have a guaranteed salt spray life of over 72 hours against red rust.
The plating complies with the relevant European standards.
Set composition:
Straight grease nipple:
6x100 20pcs.
8x100 10pcs.
10x100 10pcs.
45° grease nipple:
6x100 15pcs.
8x100 10pcs.
10x100 10pcs.
Grease nipple 90°:
6x100 15pcs.
8x100 10pcs.
10x100 10pcs.E
